Maintenance Methods For Aluminum Composite Panels

Aluminum composite panel, or ACP, is one of the most commonly used construction materials today. As a result, ACP provides a wide range of specific characteristics that can enhance the establishment’s originality. ACP adds a beautiful appearance to your building’s architecture, but these panels are frequently exposed to pollutants, acid from precipitation, and dust. When your ACPs are exposed, the panels will appear drab, and the establishment’s attractiveness will disappear. Here’s how to maintain aluminum composite panels.

What Is the Aluminum Composite Panel?

The aluminum composite panel is made up of two aluminum sheets and a mineral-charge-holding thermoplastic base core. It’s made using a continuous lamination technique, in which a sheet of the material that will make up the core is extruded and crushed between two unwinding aluminum sheets.

Keep the Coating Safe

This is a maintenance procedure for the ACP’s installation section. If you used a sealant to install the ACP, you should wait 40-45 days before removing the protective film. This will protect it from stains caused by sealants that have solidified on the surface.

Keep the ACP Sheet’s Color

When wiping the surface of the ACP during cleaning, gentle cloths are recommended. This procedure will not cause any scratch damage to the panel’s color paint. Cleaning solutions including potassium hydroxide or caustic soda are not recommended. If you utilize this hazardous mixture, the ACP covering paint will peel away, causing corrosion.

Maintain a Cleaning Routine

If you’re using a sponge, squeegee, or microfiber, make sure to clean the ACP’s surface from top to bottom. Drips from the cleaning solution will be reduced, and the panel will look as good as new.

Cleaning Detergents Should Be Used

When washing aluminum composite panels on the outside and inside, use a light detergent. Don’t forget to do a short pre-test with the detergent before using it all over. The dust and other harsh stains shown on the panel will be gently removed with this cleaning detergent. The water temperature should be warm while diluting the detergent because cleaning an ACP at a high temperature can damage the surface or leave the dirt behind.

Keep in mind that the detergent to clean water ratio should be 1:5. Wipe the filth away using a sponge or other soft cloth. When dyeing the surface of the ACP, use a squeegee.

Cladding Solutions from Clearview Cladding Concepts

Following these simple maintenance instructions on a regular basis will extend the life of your ACP and keep the panel’s appearance. Clearview Cladding Concepts is well-known in the construction industry for its extensive portfolio of projects. We have been able to establish the reputation that we have today thanks to our collaborative efforts with architects and contractors, as well as our long-standing connections. We fit your needs with an emphasis on aluminum composite panel facades, building envelopes, and column covers.

Check out our website if you’re looking for aluminum composite panels for your next project because we have a wide range of aluminum composite panels to choose from. Alternatively, you can call us with any further questions regarding our products, and one of our friendly customer service specialists would be happy to assist you.